Local contractor in 55386

A new commercial-grade Bradford-White 50-gallon water heater was installed to replace the old unit in Victoria. We handled the entire process, including the removal of the old tank and ensured proper connections, all covered by warranties. This installation enhances the efficiency of the water heating system while providing reliable hot water for the home.

A furnace replacement was necessary to enhance heating efficiency. We installed a new York 97% efficient gas furnace with an 80k Btu capacity. The installation included a mechanical permit, a new Honeywell T4 thermostat, and a warranty on parts and workmanship. We also removed the old unit as part of the process.

A malfunctioning air conditioning unit prompted us to conduct an emergency service call. We replaced the motor and compressor starter for the AC condensing unit, ensuring that the system was fully operational again. Following the installation, we performed a run test and recorded the temperature differential to guarantee optimal performance.

A failing air conditioning system prompted the need for a replacement unit. We installed a new Goodman 13.4 SEER2, 3-ton AC system, including the necessary components such as a cased evaporator coil and a new disconnect. The old unit was removed, and the existing line set was flushed and reused. Mechanical and electrical permits ensured compliance and safety for the installation in Victoria.

A malfunctioning air conditioning unit required our attention. We conducted a thorough service call in Victoria to assess the issue. We added 2 lbs of R410A refrigerant to ensure optimal cooling performance and applied a leak sealant with dye to address any small leaks and assist in detecting larger ones.

A broken air conditioning system prompted us to conduct a service call in Victoria. We performed a detailed assessment to identify issues, including a leak search. We provided calibration and troubleshooting services to ensure the system operated effectively. A quote for AC replacement will be provided separately, with credit applied for the current service towards new equipment.

To update the home's heating and cooling capabilities, we installed a new York 97% efficient gas furnace and a new York air conditioning system. This included a new thermostat and all necessary permits. The existing line set was flushed and reused, ensuring efficient performance. We also offered interim solutions until the installation was completed.

A broken air conditioning unit led to a service call at a residence in Victoria. We replaced the capacitor, which involved swapping out the motor/compressor starter on the AC condensing unit. After completing the replacement, the unit was tested and showed a temperature differential of 25°F, ensuring it could effectively cool the space.

A broken air conditioning unit prompted us to assess and resolve the issue. We replaced the motor/compressor starter in the AC condensing unit and performed a run test to ensure proper operation. Additionally, we conducted minor repairs to the outdoor unit due to mice damage. Everything was completed efficiently, restoring comfort to the home in Victoria.

An issue with the HVAC system prompted us to provide service in Victoria. We added 1.5 pounds of R410A refrigerant, which allowed the system's pressures to align with manufacturer specifications. The temperature differential improved by 5°F, enhancing overall system efficiency. Derek was assigned to ensure the work was completed effectively.

A routine inspection of the HVAC system was conducted to ensure optimal performance. We checked the air filter, adjusted the cooling airflow, tested the TXV, and measured the amp draw of the compressor. It was determined that the compressor is not pumping refrigerant effectively, indicating a need for replacement to ensure proper cooling in the home. An estimate will be provided separately.

A malfunctioning air conditioning unit prompted us to respond to an emergency service call. We replaced the motor/compressor starter for the AC condensing unit. After the repair, we conducted a run test, confirming that both the upstairs and main level zones were effectively cooled with an impressive 22°F temperature differential.

The homeowner's air conditioning unit was experiencing issues and required immediate attention. We performed an emergency service call and replaced the AC capacitor, specifically the motor/compressor starter for the condensing unit. After the replacement, we conducted a run test, confirming that the unit was cooling effectively with a 25F temperature differential.

A broken air conditioning unit prompted our service. We responded to the emergency call by replacing the capacitor for the AC condensing unit, ensuring the system was operational again. After completing the repair, we performed a run test to verify the functionality. The job was successfully completed in Victoria.

A refrigerant leak check was performed to ensure the efficiency of the air conditioning unit. We conducted an ultrasonic leak test and utilized UV dye to thoroughly inspect the system. No leaks were found during the inspection, confirming that the unit is operating properly. Derek handled the service in Victoria.

The AC inspection revealed that the unit was mechanically functional, and all components were operating within manufacturer specifications. We ensured proper calibration and airflow checks across multiple registers. We identified some areas with inadequate airflow and provided recommendations for adding refrigerant and performing a leak check. This comprehensive evaluation helps in maintaining optimal performance for the AC system.

A broken air conditioning unit needed immediate attention. We dispatched Derek to perform an emergency service call. During our visit, we added refrigerant to restore functionality and employed a leak sealant to address potential small leaks in the system. This comprehensive approach ensures that the AC operates efficiently, providing comfort for the homeowner in Victoria.

An air conditioning system check-up was performed to ensure optimal performance for the unit. During this service, we conducted calibration and troubleshooting, addressing any necessary minor repairs. We also wrapped the outdoor suction line with UV-rated material to enhance its durability. The work was completed in Victoria, delivering a thorough maintenance solution for the client's HVAC system.

A malfunctioning air conditioning unit prompted us to act quickly. We replaced the motor/compressor starter for the AC condensing unit and conducted a run test, recording a 16°F temperature differential, ensuring optimal cooling performance. To enhance efficiency, we adjusted the blower speed for cooling as well. We recommend scheduling a furnace check-up in fall and an AC check-up in spring for ongoing maintenance.

A broken air conditioning system prompted us to replace a failed condenser fan. We meticulously assessed the unit and successfully completed the repair, ensuring the AC functions smoothly again. If you're experiencing similar issues with your HVAC system, we are ready to assist you.

A fault code indicated an issue with the blower motor in the HVAC system. We performed troubleshooting on the Bryant advanced communicating system to identify the source of the problem. As part of the service, we replaced the faulty blower motor to ensure optimal performance, addressing the concern efficiently. Derek was instrumental in resolving this issue in Victoria.

A malfunctioning air conditioning unit was addressed promptly on the scheduled visit. We replaced the motor/compressor starter for the AC condensing unit to ensure optimal functionality. After completing the repair, the unit demonstrated excellent performance, achieving a 20-degree temperature drop, providing effective cooling relief in Victoria.

To upgrade the home's HVAC system, we installed a new York LX 4-ton air conditioning system and a York Affinity gas furnace. This included setting up a new Honeywell thermostat, upgrading to an Ecobee Enhanced WiFi Smart thermostat, and adding an Aprilaire humidifier. All equipment came with manufacturer warranties and we ensured proper disposal of the old units.

A malfunctioning air conditioning system prompted our visit to Victoria. We replaced the motor/compressor starter for the AC condensing unit and conducted a run test, which revealed a significant temperature drop of 23°F. This ensured the system was cooling effectively again. Photos documenting the service and replacement were captured for reference.

A broken air conditioning unit prompted us to conduct a thorough service call in Victoria. We identified the need to add 2 pounds of R410A refrigerant to restore the system's efficiency. Additionally, we applied a leak seal and dye additive to help locate any future leaks. This comprehensive approach ensures the air conditioning unit operates effectively.

A broken air conditioning unit prompted a thorough service. We conducted an electronic leak check to identify any refrigerant leaks. After confirming issues, we added four pounds of R410A refrigerant and applied a special leak sealant with dye to enhance future leak detection. Derek handled the service effectively, ensuring the AC system was restored for optimal cooling in Victoria.

A new air conditioning system was installed to enhance cooling efficiency. We replaced the old unit with a York 16 SEER2, two-stage, 3-ton AC system, which included the necessary mechanical permits, condenser, and evaporator coil. The old unit was removed, and we ensured complete system functionality. This upgrade is designed to keep the home comfortable in Victoria.

Ice buildup on the indoor and outdoor units indicated a malfunctioning AC system. We checked the refrigerant pressures, confirmed proper zone damper operation, and adjusted blower speed settings. After replacing a dirty air filter and reopening closed registers, the unit functioned well, achieving a significant temperature drop on a warm day in Victoria.

A system replacement was carried out to enhance the heating and cooling efficiency of the home. We installed a new York 97% efficient, 60,000 BTU, 2-stage gas furnace along with a York 2-ton, 14.3 SEER2 AC system. Additionally, we replaced outdated venting and added ducts for future expansion. Everything was completed in compliance with all regulations, ensuring a reliable and efficient system for the homeowner in Victoria.

A noisy inducer motor indicated a problem with the furnace. We performed troubleshooting and discovered high gas pressure and airflow issues. After clearing the condensate trap and confirming proper drainage, we adjusted the gas pressure and conducted ESP tests. The unit ran smoothly, maintaining safe CO levels and a temperature rise of 55°F. Adjustments were made for both high and low fire settings, ensuring the furnace operates efficiently. Digital photographs were taken to document the service.