Local contractor in 55346

A new York 2-ton, 14.3 SEER2 AC system was installed, along with a 97% efficient York 80k BTU gas furnace. This project included a cased coil with TXV, a Honeywell T4 thermostat, and all necessary permits. We also ensured the existing line set was properly flushed and reused while hauling away the old units. This setup will provide efficient climate control for your home in Eden Prairie.

An issue with the air conditioning system prompted us to step in. We replaced the motor/compressor starter in the AC condensing unit to restore functionality. Additionally, we added the first pound of R410A refrigerant, ensuring the system operates efficiently. Our thorough approach guarantees the air conditioning unit is back to providing optimal cooling for the homeowner in Eden Prairie.

A malfunctioning air conditioning system prompted us to replace the old unit with a new York 2-2.5 ton, 13.4 SEER2 AC system in Eden Prairie. We completed the installation, which included updating electrical components to meet code and securing the necessary permits. The existing line set was flushed and reused to ensure optimal performance.

An aging HVAC system prompted us to replace both the air conditioning unit and the gas furnace at a home in Eden Prairie. We installed a new York 2-ton AC system and a 97% efficient gas furnace along with a Honeywell thermostat. This upgrade includes a comprehensive warranty for peace of mind and ensures optimal heating and cooling efficiency for the homeowner.

A system replacement was performed to enhance the home's heating and cooling efficiency. We installed a new 2.5 ton, 13.4 SEER2 York air conditioning system along with a 97% efficient York gas furnace. The installation included all necessary components and permits, ensuring optimal performance and compliance with local regulations. The old units were removed, contributing to an upgraded and efficient HVAC system for the homeowner in Eden Prairie.

A malfunctioning air conditioning unit led us to diagnose the issue effectively. We replaced the motor/compressor starter for the AC condensing unit, which had experienced a thermal lockout due to a faulty fan capacitor. After the replacement, the system was tested and operated smoothly, achieving a temperature drop of 21.5°F.

A malfunctioning air conditioning unit prompted our visit to Eden Prairie. We discovered the indoor and outdoor units were frozen due to low refrigerant levels. To restore cooling, we added 1.5 lbs of R-22 refrigerant. Given the age of the unit, we advised that leak checking and repairs may not be cost-effective, and an estimate for replacement will be provided.

A broken furnace was brought to our attention. During our troubleshooting, we found that the 19-year-old system was off but showed no error codes. We tested several components, including the flame sensor and the pressure switch port, ensuring they were functioning correctly. We also noted that the Nest thermostat had a low battery issue. To enhance performance and reliability, we strongly recommended enrolling in our Comfort Club maintenance plan.

A malfunctioning 2-stage pressure switch was identified in the system. We replaced the failed component to ensure optimal functionality and reliability. This repair enhances the overall performance, providing peace of mind for the ongoing operation of the equipment. The job was completed smoothly, resulting in a fully functional system for the homeowner in Eden Prairie.

A broken furnace was causing concerns for the homeowner in Eden Prairie. We conducted a thorough service call, covering travel time and the initial assessment. After resetting the unit and troubleshooting, we tested components including the flame sensor and gas pressure. The furnace operated without significant issues; however, we noted some sporadic sputtering which may indicate an intermittent pressure switch or communication issue from the control board.

A broken air conditioning unit prompted our visit to Eden Prairie. We successfully conducted a service call where we cleared a plugged condensate drain line, ensuring proper flow and functionality. We also charged the unit with R22 refrigerant to restore its cooling capabilities. The system was calibrated and troubleshooted, which helped identify and resolve minor repair issues, preparing it for optimal performance.

A routine check-up for the HVAC system was conducted to ensure optimal performance in the rental property. We performed a thorough assessment, checking the air conditioning system and addressing any maintenance needs. Additionally, we provided guidance on the Venmar Construco air exchanger, assisting the homeowner with its maintenance requirements. This proactive approach ensures the system runs efficiently for incoming renters.

A new Fantech Atmo 200cfm HRV was installed to enhance indoor air quality. We also set up an Eco Touch automated digital control with a VOC sensor, which required four communication wires. This ensures optimal operation and efficient air management in the home. The installation was completed successfully in Eden Prairie.