Local contractor in 55331

A furnace check-up was performed to ensure the system was operating efficiently. We conducted a thorough inspection of the unit, identified components, and confirmed functionality. This maintenance ensures comfortable heating and reliable operation throughout the colder months in Excelsior. Proper inspection helps prevent future issues and maintain optimal performance.

A malfunctioning in-floor heating system led us to install a new commercial-grade General Electric 40-gallon, tall, power vent water heater to support the basement's heating needs. We also added an expansion tank, an air separator with a vent, and a pressure/temp gauge. Additionally, we performed a thorough check-up on the fireplace, ensuring proper flow and resetting the logs for optimal performance.

A malfunctioning furnace prompted our visit to the home in Excelsior. Upon inspection, we identified a clogged pressure switch port as the issue after troubleshooting the control board and motor. Following the necessary repairs, the furnace operated smoothly. We also monitored the carbon monoxide levels and temperature rise to ensure safety and efficiency.

A comprehensive HVAC system upgrade was performed. We installed a new York 97% efficient, 80k BTU gas furnace, ensuring optimal heating performance. Additionally, a 14.3 SEER2, 3-ton AC system was set up for efficient cooling. This installation included new components, such as a Honeywell thermostat and a copper line-set. All old units were properly disposed of, enhancing the home's energy efficiency.

A malfunctioning air conditioning unit required our assistance to restore cooling functionality. We replaced the motor/compressor starter for the AC condensing unit and conducted a run test with temperature differential recording. After the repair, the unit was operational and maintained a 16°F temperature differential. The system was noted to be slightly low on charge, but further refrigerant was not added at this time.

A water softener installation was completed for our client in Shorewood. We installed a Brassmaster two-tank water softener, ensuring efficient removal of hard minerals from the water supply. The process included hauling away the old tank to provide a clean transition to the new system. This upgrade will enhance water quality and deliver better results for both cleaning and appliances.

A malfunctioning water system prompted us to replace a 3/4" main shut-off valve for a well system. Derek efficiently managed the installation, ensuring optimal functionality for the plumbing. The completed work contributes to the reliability of the water supply for the homeowner in Excelsior. We appreciate the opportunity to provide this essential service.

A new Aprilaire E100 whole home ducted dehumidifier was installed to effectively manage humidity levels. We mounted the unit and created two rigid return branches, while also connecting a flex supply with a backdraft damper. Additionally, we insulated all sweating copper water supply lines to ensure optimal performance. The installation included upgrades to the Ecobee thermostat for enhanced control.

A malfunctioning air conditioning unit necessitated our visit. We replaced the motor/compressor starter for the AC condensing unit, installed a new non-metallic AC whip, and repaired multiple low voltage communication wires. Additionally, we conducted a run test and confirmed that the pressures were good. The low pressure switch was bypassed for optimal performance.

A malfunctioning zone system prompted us to perform repairs in Shorewood. We installed four new Honeywell damper assemblies with motors, along with a new 75VA transformer to power the zone board. After the installation, we conducted thorough testing, confirming that all zones opened and closed as designed.

A malfunctioning air conditioning unit prompted us to take action in Shorewood. We replaced the faulty motor/compressor starter and a leaking Schrader core, ensuring the AC unit was operational and achieving a 20-degree temperature differential. Additionally, we conducted a thorough diagnostic of the zone system, with a follow-up estimate provided for any necessary part replacements.

A new air conditioning system was installed to enhance cooling efficiency. We replaced the existing unit with a York 5 ton, 13.4 SEER 2 AC system, including a mechanical permit, new AC pad, condenser, and cased evaporator coil. We also ensured the existing line-set was flushed and reused, providing warranties on parts and workmanship. This upgrade will improve comfort in the home.

A system replacement was necessary for the homeowner in Shorewood. We installed a new York 14.3 SEER2, 3-ton AC system and a 97% efficient, 2-stage gas furnace. Along with these installations, we added an Ecobee enhanced Wi-Fi thermostat. We also repaired the sump pump discharge and relocated the condensate pump while replacing the old humidifier drain line.

A broken air conditioning unit prompted our service visit in Shorewood. We conducted a thorough inspection and identified the issues affecting the system. Subsequently, we provided a service call to address the problems and applied a credit toward equipment replacement, ensuring the unit will perform efficiently.

To ensure optimal performance and efficiency, we conducted an annual check-up on the HVAC system for the residence in Shorewood. Our technician, Derek, performed a comprehensive inspection, addressing all necessary maintenance tasks. Following this check-up, we provided the homeowner with detailed documentation of our findings and any recommended actions for future upkeep.

To improve the functionality of the plumbing system in Shorewood, we installed a customer-supplied toilet and set it with a new supply line. Additionally, we replaced the laundry supply and drain box, ensuring that the new shut-off valves are in place. This work enhances both convenience and reliability in the home's water systems.

A malfunctioning water heater prompted us to replace the old unit with a new commercial-grade General Electric 40-gallon water heater. We also relocated the heater for better clearance with the central air system. Additionally, we installed a new brass utility sink faucet and replaced a failed gas shut-off valve. All necessary connections were made to ensure functionality and safety.

To enhance functionality, we installed a new damper with a motor in the HVAC system. After completing the installation, we ran tests to ensure the system operates efficiently. This replacement contributes to improved airflow and overall performance. The work was performed in Excelsior, and we are pleased to provide this service.

A furnace replacement was necessary for the property in Excelsior. We installed a new York 97% efficient gas furnace, which included a mechanical permit and a sheet metal transition if required. The service also involved replacing the existing 3" PVC venting to meet mechanical code. Old unit removal was completed efficiently. Derek was assigned to this project.

A broken furnace prompted us to conduct a thorough service call. We performed calibration and troubleshooting, addressing minor repairs while also checking carbon monoxide levels, capacitor functionality, and the flame sensor. An estimate for replacement was prepared and communicated, ensuring that the homeowner was informed of the next steps.

A need for a new water heating solution led us to install a Rinnai 199k BTU tankless heater in Shorewood. We managed the entire process, including capping and removing the old water heater. Additionally, we ensured all necessary venting, gas lines, and supply lines were installed correctly, providing warranties on both parts and labor for peace of mind.

A failing furnace prompted the replacement of the heating and cooling systems in Shorewood. We installed a new York 97% efficient gas furnace and a 2.5 ton York air conditioning system. This included sheet metal transition, a new thermostat, necessary permits, warranties, and hauling away the old equipment. Detailed documentation of the installation process was provided.

During our service call in Excelsior, we capped the duct work and removed an old air exchanger. This process included hauling away the outdated unit, ensuring all components were properly disposed of. Our work contributes to maintaining a comfortable indoor environment for the homeowner.

A broken furnace was a concern for the homeowner. We completed a thorough inspection, troubleshooting the blower motor and the control board. Our diagnostics revealed a failed control board, which was preventing the blower motor from operating. We will provide an estimate for repair options.

A high-efficiency furnace installation was completed in Excelsior. We installed a new York 96% efficient, two-stage gas furnace along with an Ecobee Smart Wi-Fi thermostat. This service included all necessary permits, any sheet metal transitions required, and the disposal of the old unit. An air filter cabinet was also provided to enhance overall efficiency.

A malfunctioning furnace necessitated our attention when we discovered a very loud inducer motor and a failed ignition module in the 40-year-old unit. We determined that the system would not operate without part replacement. Additional concerns regarding potential secondary issues, such as carbon monoxide risks, were noted for future consideration.

A new humidifier and zone system installation was completed for the property in Excelsior. We installed an Aprilaire 600A bypass humidifier for effective humidity control. Additionally, we set up a Honeywell zone panel kit, including two damper assemblies and new Ecobee Smart Wi-Fi thermostats for both the lower and main levels, followed by a comprehensive system test to ensure optimal performance.

A new high-efficiency furnace was installed to enhance heating in the home. We replaced the older unit with a York 97% efficient gas furnace featuring an ECM motor. Additionally, we included a Honeywell T4 thermostat and completed a propane conversion kit, ensuring optimal performance and comfort. All necessary permits were secured, and the old unit was removed from the premises.

A malfunctioning furnace needed our attention. We performed calibration and troubleshooting to address the issue. This included checking the carbon monoxide and Liquid Propane pressure, assessing the temperature rise, and inspecting the exhaust system to understand why the rollout switch had tripped. This thorough service ensured the furnace operated safely and efficiently.

A broken furnace prompted us to attend to the homeowner's needs in Shorewood. Upon inspection, we discovered the draft motor was not pulling enough air for the pressure switch. We initiated troubleshooting to address this issue effectively. Our work included calibration and minor repairs to restore proper functionality. Images documenting the issue were taken to support our findings.